ToolkitRC M6 150W 10A DC Battery Balance Charger

ToolkitRC M6 is a handy small charger and workshop assistant in one. The charger has power up to 150W and can charge 1-6S LiPo, LiHV, LiFe, Lion batteries. It also supports charging NiMH and Pb batteries. The batteries can be charged, discharged or set to storage mode. The ToolkitRC M6 does not have an integrated power supply, so it must be powered by an external battery or a 7-28V power supply. The charger can set the minimum input voltage, so you don't have to worry about draining the supply batteries too much. ToolkitRC M6 also has an integrated USB port for charging the phone and other accessories.

It also supports the function of a DC power supply with adjustable voltage 1-28V and current 1-10A. The ToolkitRC also works as a battery meter and balancer without external power. Just plug the battery into the output port and connect the balance connector. You will also appreciate the ability to measure and transmit PWM / PPM / SBus signals so you can use the M6 toolkit as a servo tester. Everything is clearly displayed on the 1.8" color display.

M6 Charger Features

1. Lithium battery cut-off voltage can be set (TVC function)
2. Measure battery voltage, internal resistance, balance
3. Measure PWM,PPM, S.Bus signal values @ 1ms accuracy
4. Output PWM, PPM, S.Bus standard signal @ 1ms accuracy
5. The customizable 1-28V constant output voltage, 1-10A constant output current
6. Multi-language optional
7. USB 2.1A@5.0V Output (Mobile device charging)
8. U-disk firmware upgrade (Slave device)

Charger

1. Input voltage: 7.0-28V
2. Type of battery: Lipo, LiHV, LiFe, Lion @ 1-6S, NiMh @ 1-16S, Pb @ 1-10S
3. Charge power: 150W / Up to 10A
4. Discharge power: Recycle Mode: 150W/ Up to 10A Normal Mode: 8W @ Up to 2A
5. USB: 2.1A @ 5.0V (Mobile Charging) or USB Firmware updating
6. Dimensions: 68x49x26mm
7. Weight: 80g
8. LCD: 1.8inch TFT RGB, 160×128 Pixel

Measurement

1. PWM: 880-2200us @ 20-400Hz
2. PPM: 880-2200us*8CH @ 20-50Hz
3. SBUS: 880-2200us*16CH @ 20-100Hz
4. Voltage: 1.0-5.0V @ 1-6S
5. IR: 10-99mR @ 1-6S

Output

1. PWM: 500-2500us @ 20-1000Hz
2. PPM: 880-2200us*8CH @ 50Hz
3. SBUS: 880-2200us*16CH @ 74Hz
4. Power: 1-10A @ 1-28V Mode: CC+CV

 

Error Codes

1.over current

2.overvoltage

3.over temperature

4.timeout

5. battery is invalid

6.input low

7.input is too high

8.balance is complete

9.is not connected to the balance port

10.not connected to the main port

11.timeout

12.types do not match

13.cells error

14.battery needs to be balanced

15.This mode is not rechargeable

 

Package Includes:

1. ToolkitRC M6 V2 Smart Charger/Discharger
2. USB A-A cable
3. Instruction Guide