Radiolink Pixhawk Flight Controller SE100 GPS with GPS Holder Buzzer for drone quadcopter Multirotor
Product Description
Based on the original functions of the 3DR PIX, almost two years of technical development in the field of flight controllers by the Radiolink technical team, redesigned and innovated the PIX original circuit, and repeatedly tested the function to achieve better performance. Anti-static from SMT to welding, all the chips, processor, sensors and others are import with whole package by primary agency.
Dust-free workshop and automatic manufacture and test system to ensure the PIXHAWK are durable. Reduce the mutual interference of the internal components of the flight control board, achieve noise less, more accurate of compass, and make flight safer.
Top Configuration
- 32bit 32F427 ARM Cortex M4 Core + FPU (floating point unit)
- 168 MHZ / 256 KB RAM / 2 MB Flash
- 32bit Fault Protection Coprocessor
- ST Micro L3GD20H 16 bit gyroscope
- ST Micro LSM303D 14 bit accelerometer/magnetometer
- MPU 6000 3-axis accelerometer/gyroscope
- MEAS MS5611 barometer
Same Setting As ArduPilot Flight Controller
Same etting as the APM PIXHAWK on Mission Planner, via USB cable connect PIX and computer to set up, user could reference for APM PIX official instruction.
Note: If you had updated firmware to V4.0, please connect a GPS module to PIXHAWK when calibrating the compass.
Pix Features
|
|
|
|
|---|---|---|
A Good Choice for DIY DroneComplete installation tutorial, easy to set up, eliminating the cumbersome and complicated installation and calibration process, making your DIY racing drone easier. |
Support ModelRadiolink PIXHAWK usually used with Long-wheelbase Quadcopter or 3-8 Axis Multirotor. Supporting Althold, Stabilize, Loiter, Poshold, Return and other flight modes. |
Package Included
|
 |
 |
 |
 |
 |
 |
|
|---|---|---|---|---|---|---|
| Radiolink PIX Flight Controller | Radiolink Mini Pix Flight Controller | Radiolink M8N GPS SE100 | Radiolink M8N GPS TS100 | Radiolink Crossflight Flight Controller | Radiolink SU04 Ultrasonic Sensor | |
| Size | 3.22”*2.04”*0.65” | 1.53”*1.53”*0.47 | 1.89”*1.65”*0.59” | 1.18”*1.26”*0.47” | 1.56″*1.56″*0.51″ | 0.79″*0.87″0.75″ |
| Weight | 1.34oz | 0.53oz | 1.23oz | 0.70oz | 0.58oz | 0.28oz |
| Connectors | PH 1.25 | GH 1.25 | GH 1.25 or PH 1.25 | PH 1.25 | GH 1.25 | / |
| Set Parameters | by Ardupilot Mission Planner | by Ardupilot Mission Planner/Radiolink Mission Planner/QGC | / | / | by Ardupilot Mission Planner/Radiolink Mission Planner/QGC | / |
| Upgrade Firmware | Ardupilot firmware by Ardupilot Mission Planner | Radiolink firmware by Radiolink Mission Planner/Ardupilot firmware by Mission Planner | / | / | ONLY Support Upgrade Radiolink firmware by Radiolink Mission Planner | / |
| PWM Output Channels | 8 | 6 | / | / | 10 | / |
| OSD Module Integrated | No | No | / | / | Yes | / |
| Compatible with | Rotary/3-8 copter/Airplane/VTOLCar/Boat/Robot/Mower | Airplane/3-6 Copters/Helicopter/VTOL/Car/Boat | PIXHAWK | Radiolink Mini Pix | Airplane/3-8 Copters/Helicopter/Car/Boat/Submarine/Radartracker | Helicopter, Multirotor, Airplane, Car, and Boat |
