
CUAV V6X Flight Controller
CUAV V6X Flight Controller is a new generation of Pixhawk designed by CUAV and PX4; it is designed based on the Pixhawk FMU V6X standard and pursues ultimate security and stability; it adopts H7 double-precision floating-point arithmetic unit and Cortex-M3 coprocessor, independent bus, and power supply. Three redundant IMU, IMU temperature factory pre-calibration technology, dual redundant barometer design, an all-round guarantee of UAV flight safety and rich expansion capabilities; integrated 100M Ethernet PHY, can communicate with the mission computer (Airborne computer), fiber optic inertial navigation, high-end surveying and mapping cameras and other industrial UAV-mounted equipment for high-speed communication, which meets the needs of high-end UAVs.
Specifications :-
Processor |
STM32H75311K6 |
Accelerometer& Gyroscope |
ICM42688-P |
Compass |
RM3100 |
Barometer |
2×1CP-20100 |
PWM I/O |
16 |
Power |
42 for UAVCAN, 2 for SMBUS (12C) |
GPS |
2, 1 GPS port with 12C and safety switch (GPS1), |
TELEM |
3 |
CAN |
2 |
PPM RC |
1 for PPM receiver |
SBUS/DSM/RSSI |
1 for SBUS/DSM/Spektrum in and Analog (3.3V)/ PWM input |
SBUS outs |
1 |
FMU Debug |
1 |
10 Debug |
1 |
Ethernet |
1 |
SPI EXTERNAL1 |
1 (SPI6 interface, for expanding external sensors) |
ADIO |
1 AD3.3/ADC6.6 |
UART4 |
1 |
USB |
2, 1 for Type C, 1 for GH interface USB |
Operating voltage |
4.75~5.45V |
Servo input voltage |
0~9.9V |
Operating temperature |
-20~85 |
Shipment Weight |
0.424 kg |
Shipment Dimensions |
18 × 16 × 6 cm |


















